Staying connected to the internet can be a bit of a challenge when you travel in an RV. It has become a lot easier with
better cell phone connectivity, but
our need for data seems to grow exponentially, whereas as our budget to pay for
expensive data plans doesn't! Connecting to your RV park's Wi-Fi is a
good way to help reduce the data load on your cell phone / MiFi card plan,
but connecting to that signal can be a real issue. If you get connection drop
outs, "cannot connect," "connection timeout," or password
issues, then a poor signal strength is most likely the culprit. If that is the
case, then boosting that Wi-Fi signal with a Wi-Fi booster is a good solution. However,
it is not magic. Keep in mind, the RV park is still responsible for
appropriating the correct amount of bandwidth to the users. If the RV park has
enough bandwidth for 50 RVs and there are 100 RVs in the park, then that will
be a problem no matter what you do. It is a two-way street and utilizing a Wi-Fi
booster makes sure you are doing your part. A booster is very useful, and
this guide is meant to give you an introduction to how boosting works and
choosing the right booster.
is basically like a two-way radio. Instead of speaking English, your computer
speaks a language called 802.11. The radio waves use a frequency band
called the 2.4GHz ISM band which is also used by microwave ovens and some
cordless telephones. This means that Wi-Fi can sometimes suffer interference
from these devices. Also, there are some other frequency variations, but you get the point. It’s important to remember two things about
Wi-Fi. First, it is mostly line-of-sight. Radio waves of this frequency do not
pass very well through objects, especially metal and objects with a high-water
content (this is how a microwave works - water absorbs radio frequencies of
this energy and in doing so, heats up). For that reason, fog, rain, wet leaves
and our own bodies can also impede the Wi-Fi signal. Secondly, remember that I said that Wi-Fi is two-way. You have
to be able to “hear” the signal, but they also have to be able to “hear” you.
This is the root cause of many
of the challenges in trying to connect to a RV
park’s Wi-Fi. The power output of a typical laptop Wi-Fi is about 0.2W
and that from your smartphone or tablet is typically much less. They are
designed to communicate to a home or office router that is at the most 15-20
feet away, not 100-200
yards away or further. And
remember the square law: the strength of a signal reduces as a square of the
distance, meaning that if you double the distance from the source, the signal
strength reduces by 4x. So what typically happens is that your laptop
can “hear” the Wi-Fi signal (because most parks have large more powerful
antennas), but your little old laptop can’t send its signal back which is why
you can’t connect or have connection timeout failures.
So enough of the tech talk.
Bottom line is that, in order to reliably connect to most campgrounds
Wi-Fi, we need some help. Let’s take a look at the various options.
Getting a BetterSignal
Based on the previous section
and your new-found technical prowess, it’s fairly obvious that there are only
three ways to get a better signal. Right?
Move closer to the source (not
Reduce any interference (get
outside, get high and reduce anyobstructions, better line of site)
Increase your signalstrength
Let’s take a look at each of
Closer to theSource
If you’re lucky, you can request
to be parked close to the Wi-Fi antenna. However, this doesn’t always work
because antennas put out the signal in a three-dimensional lobe shape (the
exact shape varies depending upon the antenna design). This means that it’s
hard to predict where you will get the best signal - you can actually get
too close. You’ve probably
noticed this when driving on the freeway with no cell phone signal and you’re
like, “What the heck? I can literally see the cell phone tower right there!”
That’s my point.
Most RVers don’t use cordless
phones so that’s not normally a problem. Moving your laptop closer to a
window facing the RV park antenna can help, or better still, going outside (more
practical with a tablet or smartphone). You may have noticed this before while RVing; small changes to your location can make a big difference. You can experiment with this at your next RVing location.
is where we can get all techy and gadgety. There
are two parts to increasing the signal strength. One is to use a bigger
antenna. What an antenna does is listen for the Wi-Fi signal and send out your
Wi-Fi signal, just like the dish on your satellite receiver. If you increase
your signal strength, then you can hear signals that would otherwise not be possible to hear.
Generally, the “bigger” the antenna we can use, the better the signal (like every
rule there are always exceptions, but this will do for now).
The second way is to increase
the output power. A
typical radio station might transmit with 10-20,000W of power (compare that to
your little old laptop’s 0.02W). Luckily for us though, there are devices that
you can buy called Wi-Fi Boosters that combine a more powerful Wi-Fi transmitter
(the “booster”) and a better antenna (to improve the receive side). So a compete WiFi booster should include a transmitter and a antenna, this completes the two way communication necessary for great WiFi.
Connecting to MultipleDevices: The TechnoRV WiFi Repeater
The Wi-Fi boosters that we’re
going to talk about connect to your laptop via USB, which also gives them
the power they need (no separate AC adapters). However, you need to tell
your computer to use the booster and not its own Wi-Fi adapter. That is accomplished using a
piece of software called a driver. Some Windows 8/10 computers come with the
driver already installed. Others you have to load it from a CD or via theinternet.
However, there are some problems
with this. What if your device doesn’t have a USB port (e.g. like a
smartphone, tablet, Kindle or Roku)? Secondly, what if you want to connect
multiple devices such as two laptops or a laptop and a smartphone to the
booster? Thirdly, the
driver doesn’t run on all laptops (it doesn’t support Mac computers).
The solution to all of these issues is a piece of gear
called a UBS Repeater. It’s one
of my favorite gadgets. Instead of plugging the booster into your laptop, you
plug the booster into the Wi-Fi Repeater. The repeater then sets up its own
hotspot or Wi-Fi signal which all your devices connect to wirelessly. There’s no need
to load any software, and any device that can connect to Wi-Fi can connect to
the repeater. You can even
connect your wireless printer to the repeater so that all your devices are
print-enabled. When you first arrive at an RV park, you have to “tell” the repeater which Wi-Fi to
“tune” in to. To do that
you configure it by visiting its own webpage. Once done, it will boost the
signal that you told it and share it with all the devices connected to it. You can even give your own hotspot a
name and protect it with a password to stop those other pesky RVers from
jumping on your boosted signal! In addition, the Repeater gives you another level of security as it is completely encrypted.
If you buy the Wi-Fi boosting
equipment from TechnoRV, it
comes with our very detailed Learning Series which talks you through
configuring and using your booster and repeater. TechnoRV will make sure you are successful with setting this system up.
here’s the run down on the Wi-Fi solutions that we’ve put together (you can
also watch this video). There are many Wi-Fi boosters out
there and we’ve tested most of them. These are the ones that we’ve found
work best and are mostreliable
while still being affordable. The more expensive WiFi boosters usually incorporate a lot of networking capabilities that 99.9% of RVers will never use. These WiFi boosters give you exactly what you need to get a stronger signal to the Parks WiFi.
Desktop Wi-Fi Booster
Our Desktop Booster combines
a 2 watt Wi-Fi booster with a 6” antenna with 5 dB gain (antenna measure
their gain in a logarithmic scale called decibels or dBs - 3 dBs represents a
doubling of the signal strength). This means that in theory, this booster is 12.5x more
powerful than your laptop in terms of power output and at least 2x as
powerful due to the antenna (useful on the receive side) giving
around a 15x performance gain. It is like replacing a Prius with a
The booster can either sit on
your desk or ideally suction
on to the window facing the campground's Wi-Fiantenna
(suction cup mount included).
Eventhoughitisinside,itcanpullinasignaluptohalf amile away provided the antenna at the other end is
powerful enough to “talk - back.” The big advantage of this solution
is that you don't need to run a cable outside. The disadvantage is that
because it is inside, there is a signal loss and your signal is more likely to
be obstructed. Having said that, it's probably the best solution in terms
personally use this unit. To buy
this solution, and allow multiple users to connect to the boosted signal, you
need the Desktop Wi-Fi Booster and the USB Wi-Fi Repeater. TechnoRV sells a Desktop Booster Kit that includes everything you need for multiple users to connect to the boosted signal.
External Wi-Fi Booster Tube
This External Wi-Fi Booster Tube has 1 watt power output, but it has a long antenna meaning
that it has more gain (8 dB compared to 5 dB of the Desktop Booster i.e. 1.5x its signal
strength). Since it is mounted outside and is higher, it generally
performs better than the Desktop Booster. It comes with a long (16')
USB cable and a couple of nylon ties for mounting. To mount, you can either use the rear ladder, or on the side of the bat wing TV antenna if you have one
of the manual crank-up types. The best way to mount this antenna is to use the TechnoRV Suction Cup Antenna Mount. This high powered suction cup mount can affix to any smooth non-porous surface, such as the side of your RV or window. The challenge is getting the cable inside -
you can either drill through the roof (Ouch!), pass it through a vent on the roof (e.g.
the refrigerator vent) or pass it through an open window or slide. Again, if you use the TechnoRV Suction Cup Antenna Mount then it is easy to run inside of a slide or window because you can mount this right at the entry point. Once inside, the USB cable plugs either into your laptop or
better still, into the USB Wi-Fi repeater, just like the Desktop Booster,
so you can connect multiple users. TechnoRV has a kit called the WiFi Pro kit with Suction Cup Mount, and this includes the External Booster Tube, Repeater, 24 feet of USB cable, Suction Cup Mount, and an AC and DC power supply.
Super Long-Range Antenna
The Long-Range Yagi Antenna is like having a
super-large dish on your satellite TV. It's
really good at pulling in a weaker signal from say a campground's indoor Wi-Fi. We also recommend this for longer distances that you can get a good line of site to. This was the situation that Phil had at a campground in Webster which doesn't
have outdoor Wi-Fi, but does have it in the recreation room. Using the Yagi, Phil was able to access this
weak indoor signal. There is a video of Phil connecting to a parks WiFi using
the Yagi on our YouTube channel.
The downside of the Yagi is that it works best if mounted
outside which means that you need a way of getting the cable inside. Secondly,
you always need to point it at the source Wi-Fi. The Yagi antenna is a directional antenna, not omni-directional. The Yagi antenna is a antenna only, and does not have a built in transmitter. For this reason we recommend using this with the TechnoRV Desktop Booster Kit. You simply unscrew the small antenna that comes with the Desktop Booster and screw on the Yagi Antenna. What we do is get to an RV park and connect with
our Desktop Booster. If this is good enough, then we are happy. If we find that
it needs some additional power, then we add the Yagi to the equation. The Yagi
is a good piece of equipment to have in your toolbox. TechnoRV has a kit that includes the Desktop Booster, Repeater, and the Yagi Antenna. This is called the Desktop Booster kit with Long Range Yagi. TechnoRV WiFi Booster Kits!
Hopefully this guide has given
you a better idea about Wi-Fi in general, and in particular, what
kind of solution makes most sense. Having free Wi-Fi available is a great
alternative to cellular data. If you find yourself needing to boost cellular
signal on your cell phone or MiFi jet pack, then TechnoRV also carries several WeBoost (formerly known as Wilson Electronics) CellBooster. The WeBoost 4G-X is the most powerful cell booster on the market right now and extends your signal range up to 60% farther than similar boosters.
These Wi-Fi and Cell Boosters
are meant as tools which you can use when you need a little help. And
let’s face it, we all need a little help from time to time when it comes to staying connected on the road.
If you have any more questions
about the Wi-Fi boosters or cell boosters, feel free to email your questions to email@example.com. TechnoRV would be happy to assist you!
The Desktop Booster is one of my favorite Wi-Fi boosting products because of its ease of use. When using this for a single device, it packs some serious results. This unit is good for only Windows operating system computers, and there must be a USB port available. So if you have a laptop that runs Window operating system, then this will work great for you. I personally use this device with my laptop, almost daily.
So what does this device do?
Remember, Wi-Fi is a two way street; you have to have the strength to send your request to the access point, and you also have to have the ability to hear the signal come back to you.
The Desktop Booster accomplishes both of these communications flawlessly with its 2 watt transmitter (sending the signal), and its 5 Db antenna (hearing the signal come back). Compare this to the standard WiFi adaptor in your devices such as laptop, smart phones and tablets. Your internal adaptor in your devices usually have a measly 0.02 watt transmitter and 1 DB gain internal antenna. The TechnoRV WiFi Booster can be as much as 10-15 times more powerful than the internal Wi-Fi adaptor in your laptop. It is not magic, it is all in the numbers. Add more power on the transmit side, and more gain on the receive side, and you will be able to connect to those camp ground access points with ease. Our customers tell us that this unit is easy to use, convenient, and once you use it, you will go nowhere without it.
Is It Easy To Set Up?
This unit will basically replace your internal Wi-Fi adaptor, and the idea here is simple, just plug the Wi-Fi Booster into a USB port, install the provided driver (easy to do), and then tell the computer to use this device instead of your internal adaptor. TechnoRV provides a complete Learning Series with this unit explaining how to set this up. Our Learning Series gives you step by step instructions on how to get this unit up and running, and of course, if you ever need further help, then just call us or email us.
Another important element of setting the booster up is making sure the Desktop Booster is in a window, or near a window, facing the direction of the access point (line of sight is a key component to successful WiFi). The unit comes with a cradle mount that the Booster slips into, and then it can be suction cupped to a window. It has about a 5 foot USB cable, so you can sit in your favorite chair and still have cable to get it to the window.
TechnoRV and the Desktop WiFi Booster
Here I am working in the RV, and as you can see the Desktop Booster is plugged into my USB port on my computer and my Booster is nicely placed at the window (I’m not using the window mount here, but that would even be better).
This desktop booster is the most convenient WiFi booster available. There are no cables to run outside and the set-up is super easy. Check out all of our WiFi products and choose the one that is best for you, including our outside antenna: the Booster Tube.
Is There a Way to Connect Multiple Devices to the Desktop Booster?
If you would like to pair this unit with our USB Repeater, then you can do that. When using a Repeater you will be splitting the signal, so the through put will be diminished a bit, but more people than not do use the Repeater. The way this would work is that instead of plugging the Desktop Booster into your laptop, you would plug it into the Repeater, and then the Repeater would create its own hotspot. Now multiple devices can connect wirelessly to the boosted signal. Here is what this set up would look like:
In closing, I would like to answer the question of, “Do these Boosters work?” The short answer is “YES,” but I leave you with a link to our customer reviews and this will answer it much better than I can: Booster Reviews
The WiFi Boosters at TechnoRV solve the connection problems that you experience while connecting to the RV parks WiFi. While the RV park is still responsible for providing an appropriate amount of bandwidth for its users, staying connected to park couldn’t be easier.
The topic of “good” Wi-Fi can be a frustrating topic for RVers and the RV Park owners. Why Can’t RV Park Wi-Fi be better? The number one rated amenity in RV parks now is Wi-Fi. Even though RVing can be seen as a way to get away from normal life, we just can’t seem to totally disconnect from being connected. A lot of what we do is wrapped up in our ability to connect to internet for things like banking, social media, shopping, searching for things to do, and much more. The RV parks get the message loud and clear, and many of them are doing their part to provide us with good Wi-Fi. You might be thinking, where are these RV parks with good Wi-Fi? Well, they are all over the place, and the problem with having a good Wi-Fi experience might just be your problem, and not the RV parks Wi-Fi system. How dare I say that! Let’s look at the Wi-Fi equation and see what I am talking about.
The RV Park is responsible for providing enough bandwidth for its patrons. If the park appropriates correctly, then everyone should have a positive experience. Now I am not letting the parks off the hook completely here, but in their defense, should the park pay for the equipment and bandwidth with the assumption that the park will be full all the time? No business would agree to that. It is like a gym membership, if everyone that was a member of the gym showed up at the same time the Fire Marshall would shut the place down due to overcrowding. The gym is not set up with the assumption that everyone will be there all at once, and parks can’t set their systems up with an assumption of 100% occupancy. Even if a park did set there Wi-Fi system up with a 100% occupancy assumption, then the variable is how much bandwidth is each RVer going to use. If you get a dozen RVers streaming video all night, then that is going to drag the system down. Some parks ask that you do not stream video. Have you ever had bad park Wi-Fi from 5-9 pm at night, and then all of the sudden it got a little better? That is because during peak times there are more people eating up the bandwidth. It is a bit of a moving target for the park owners, and understandable that they struggle with the dialing in on the appropriate Wi-Fi set up for their park.
Truth is that most RVers wouldn’t know it if the park was doing a good job or not with their bandwidth because what you are trying to connect to the access point with is not designed to connect to it effectively. Let me explain, the internal Wi-Fi adaptor in your devices, whether it be smart phones, tablets, laptops, etc., are designed to pick up a Wi-Fi signal from a very short distance. Now we are asking these adaptors to connect to access points from a hundred feet away to hundreds of yards away. In most cases our internal adaptors can’t even hear the signal from these access points much less connect to it. Then, if you can connect to it, you are constantly losing connection or the connection is slow. Here is where the finger pointing begins. The end user blames it on the RV Park, and the park says their system is working fine. The end user goes and writes a bad review on the park, and the park is left frustrated in a no win situation.
I believe the RV parks get it, we want our Wi-Fi, and if we don’t get it we are not going to be happy. As the end user, we should at least make sure we are doing our part before we start pointing our finger at the RV Park as the problem. Wouldn’t it be horrible if you left a bad review on a park, but really the problem was you and your inadequate Wi-Fi adaptor? There are solutions to taking care of the end users issues, and they are calledWi-Fi boosters. These boosters do not affect the parks performance, but do give you as the end user the ability to effectively connect to the parks Wi-Fi from long distances. Here is how it works. In essence you are replacing your internal Wi-Fi adaptor with an external booster that is much more powerful, and well equipped to meet your needs at the RV Park. To connect to Wi-Fi access points you have to have the power to send your request, and the power to hear the signal come back to you. Your internal Wi-Fi adaptor in your device has about 0.02 - 0.08 of a watt of power to send your request to the access point.
The Desktop Boosterfrom TechnoRV has a full 2 watts of power; that is 10 times more powerful. To hear the signal come back from the access point, you need an antenna. Your internal device likely has an internal antenna rated at about 1Db of gain. The TechnoRV Desktop booster has 5 Db of gain, and the External WiFi Booster Tube has 8 Db of gain. Your experience in most cases will be improved greatly by adding a Wi-Fi Booster, and the mystery of poor RV Park Wi-Fi will be solved. With a booster, if your experience is still poor, then there is a bandwidth issue at the park.
Learn more about how Wi-Fi works and how to boost Wi-Fi by going to TechnoRV. TechnoRV specializes in technology products for your RV and we are the Wi-Fi boosting specialist.